Then I used Dante Virtual Soundcard (DVS) to take the audio out of DAPS via Dante to my Avid MTRX Studio. I ran Pro Tools Ultimate without any HD Native or HDX cards, used the Dolby Audio Bridge as my Playback Engine in Pro Tools to feed the audio from Pro Tools into the Dolby Atmos Production Suite (DAPS) software. I’ll get into more specific details later, but my initial setup was a 2019 Mac Pro used natively with a MTRX Studio, DADman, Dante Virtual Soundcard (DVS), Dante Controller and the Dolby Atmos Production Suite. So hopefully this will get you working quickly and not have to spend nights pulling your hair out and cursing at the internet as I did :) My Initial ‘Native’ Setup My hope with this article is to share with you the final solution that works with every detail I can think of, every detail I wish I had when I was trying to figure it all out. Mostly because no one exactly knows because no one has ever done it.Ī lot of this was figured out with a lot of questions, a lot of trial and error and a lot of help. When you’re working with something new and a setup that basically no one else has it can be difficult to find out the exact details about how to make all of this work. I’ve had a lot of help along the way (shoutout to my friend Michael Keeley who was an immense help) but everyone at one point or another are faced with these tiny details that usually never get discussed. I would imagine that most of us have always wished for the day when Native and DSP power can be used together and with just a software update Avid have done that. Pro Tools 2021.6.0 finally brought us the Hybrid engine. Over to you Chris… Introduction And Acknowledgements This new system allows him to utilise the power of the HDX DSP with the Hybrid Engine along with the computer’s native power while mixing in Atmos all on the same computer with the most recent version of ProTools Ultimate. If this article hasn't helped you, please feel free to search again at the top of this page or, to contact support, please click here.In this article, community member Chris Testa is going to share his recent transition from using Pro Tools natively with the Dolby Audio Bridge, to a Dolby Atmos HDX Hybrid Engine system. If you're having problems installing the driver on Windows 7, please try the steps in the following article: Focusrite USB Driver will not install on my Windows 7 machine (digital signature problem). Your interface is now ready to use! If you're using recording software then make sure you select the Focusrite ASIO driver in the audio settings for that software. Save any files you may be working on and select "Yes, restart the computer now", then click Finish.Follow the instructions in the installer on the screen.Right-click on the file and click 'Run As Administrator to begin the installation.Go to your computer’s Downloads folder.Click the ' Download ' button next to the driver or control software.The following interfaces don't need control software but need a driver:.The driver will be installed at the same time. If you have one of the following interfaces, download Mix Control.Scarlett 2nd Generation 6i6, 18i8, 18i20.If you have one of the following interfaces, download Focusrite Control.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |